Orchestra

The search for the perfect symbiosis because not everyone can have an auditorium for music and sometimes the music to be shared at the time and place where it’s better off on the couch to relax alone or with friends ..

Being in harmony with the environment means you can listen at low volume and relax with the soft sounds of the first  watt  or excited  raising the volume  recreating the feeling of strength and dynamic sound live.

The particular double S inclined shape of  cabinet  to tune the timing of the sound and reverberations and preserve its harmonics without coloring but without losing any of the essence of music.

Feel the music ‘s  content of the sounds in perfect balance with each other …

Each incision returned with all of the content of what is music and sounds of that moment… of that instant.. .. for that moment you feel emotion.

The combination of sounds between the drivers used in the Orchestra project  is researched and exclusive, the only way to get the time of ” sound “and time of ” silence” consistent low-frequency harmonics up to the most slender of the higher tones .

The Heil tweeter  or better known as  Air Motion Transformer recognized as one of the best drivers for the high frequencies of all time. The increased speed with which creates sound and the speed with which returns  in the silence are unreachable from others drivers and give a sense of cleanliness and naturalness to the sound and its harmonics .

The emission  bipolar increases  three-dimensionality and the feeling of having in front us the music and its performers.

The midrange Accuton of new technology , ultra-light  and ultra-powerful magnets to control the damping factor (silence ) in a consistent manner at the time of the tweeter granted in a dedicated cabinet releases overtones and reverberations range of media through the grooves and slits in them in the back of the cabinet togheter with the sounds of the AMT .

The woofer built handcrafted Scan Speak Revelator series of last generation tuned  in particular the cabinet agreed to  harmonize low and very low frequencies up to the limits of hearing .

The crossover, hidden , artisan , simple sometimes trivial ….
Because he was born on the drivers chosen and these are chosen for the type of cross.

But give a first order 6Db per octave , a system that has always been preferred in our cross , a sound and a character in a speaker that uses drivers ” complicated ” required research ,time and passion .

The electric pulsed heart of the system  sits between the ” command” amplifier and the ” performers ” or ” drivers” of movement that creates the sound through their membranes .

Phase , impedance curves , frequency response , are analyzed and choice working  of sound and of  analysis and at the same time , thanks to the analysis system created at the beginning of Extreme Audio and always saw that  discoveries of what is sound from what is annoyance .

The passion and the search for the ” best ” of ‘ ” emotion ” saw give importance to the most different types of crossover components from the best paper oil  of the highest quality to Polypropylene  of last generation or very low loss inductors , each compatible and synergistic with a project ,  to a sound.

Everything transmitted to drivers from the cables , the ” arteries ” of the beating heart that give the right timing . So these are White Gold Cable and patent LTI .

Who most of us have seen the birth of cables and conductors in synergy with crossover design and driver .
No component is secondary when looking for an absolute result

Perfect fusion of aesthetic forms at the mere sound with diagonal grooves and curves to give the energy distribution emitted by the drivers.

Multilayered and MDF wood species with high density of tasks, each with different thicknesses of absorbing vibrations or resonators for hot zones sound that intersect each other in the project Orchestra.
Built by the best cabinet-makers entirely from Veneto in Italy and painted with super high gloss lacquer.

Orchestra can be built with wood Rosewood, Walnut, Ebony, Cherry and Oak.

Front and rear can be obtained with thick leather finely crafted as an alternative to the classic matt black and  lacquered black  hand-brushed mirror effect.

• Speaker Type: 3-way bass-reflex
• Tweeter Transformer Heil Air Motion.
• Midrange Accuton series Ceramic
• Woofer Scan Speak Revelator 26 cm
• Sensitivity: 90.5 dB.
• Impedance: 8 ohms
• Max power: 180 watts.
• Power amplifier: from 40 watts to 180 watts.
• Frequency response: 22 to 24,000 Hz + – 3 db
• Crossover: 6dB/octave
• Cut of frequency: 150 – 1900Hz
• Dimensions: cm. 120x34x85
• 
Net Weight 63kg each

The search for the perfect symbiosis because not everyone can have an auditorium for music and sometimes the music to be shared at the time and place where it’s better off on the couch to relax alone or with friends ..

Being in harmony with the environment means you can listen at low volume and relax with the soft sounds of the first  watt  or excited  raising the volume  recreating the feeling of strength and dynamic sound live.

The particular double S inclined shape of  cabinet  to tune the timing of the sound and reverberations and preserve its harmonics without coloring but without losing any of the essence of music.

Feel the music ‘s  content of the sounds in perfect balance with each other …

Each incision returned with all of the content of what is music and sounds of that moment… of that instant.. .. for that moment you feel emotion.

The combination of sounds between the drivers used in the Orchestra project  is researched and exclusive, the only way to get the time of ” sound “and time of ” silence” consistent low-frequency harmonics up to the most slender of the higher tones .

The Heil tweeter  or better known as  Air Motion Transformer recognized as one of the best drivers for the high frequencies of all time. The increased speed with which creates sound and the speed with which returns  in the silence are unreachable from others drivers and give a sense of cleanliness and naturalness to the sound and its harmonics .

The emission  bipolar increases  three-dimensionality and the feeling of having in front us the music and its performers.

The midrange Accuton of new technology , ultra-light  and ultra-powerful magnets to control the damping factor (silence ) in a consistent manner at the time of the tweeter granted in a dedicated cabinet releases overtones and reverberations range of media through the grooves and slits in them in the back of the cabinet togheter with the sounds of the AMT .

The woofer built handcrafted Scan Speak Revelator series of last generation tuned  in particular the cabinet agreed to  harmonize low and very low frequencies up to the limits of hearing .

The crossover, hidden , artisan , simple sometimes trivial ….
Because he was born on the drivers chosen and these are chosen for the type of cross.

But give a first order 6Db per octave , a system that has always been preferred in our cross , a sound and a character in a speaker that uses drivers ” complicated ” required research ,time and passion .

The electric pulsed heart of the system  sits between the ” command” amplifier and the ” performers ” or ” drivers” of movement that creates the sound through their membranes .

Phase , impedance curves , frequency response , are analyzed and choice working  of sound and of  analysis and at the same time , thanks to the analysis system created at the beginning of Extreme Audio and always saw that  discoveries of what is sound from what is annoyance .

The passion and the search for the ” best ” of ‘ ” emotion ” saw give importance to the most different types of crossover components from the best paper oil  of the highest quality to Polypropylene  of last generation or very low loss inductors , each compatible and synergistic with a project ,  to a sound.

Everything transmitted to drivers from the cables , the ” arteries ” of the beating heart that give the right timing . So these are White Gold Cable and patent LTI .

Who most of us have seen the birth of cables and conductors in synergy with crossover design and driver .
No component is secondary when looking for an absolute result

Perfect fusion of aesthetic forms at the mere sound with diagonal grooves and curves to give the energy distribution emitted by the drivers.

Multilayered and MDF wood species with high density of tasks, each with different thicknesses of absorbing vibrations or resonators for hot zones sound that intersect each other in the project Orchestra.
Built by the best cabinet-makers entirely from Veneto in Italy and painted with super high gloss lacquer.

Orchestra can be built with wood Rosewood, Walnut, Ebony, Cherry and Oak.

Front and rear can be obtained with thick leather finely crafted as an alternative to the classic matt black and  lacquered black  hand-brushed mirror effect.

• Tipo diffusore: 2 vie bass-reflex.
• Sensibilità: 89 db.
• Impedenza 8 ohm
• Potenza max: 130 watt.
• Potenza amplificazione: da 8 watt a 130 watt.
• Risposta in frequenza: 32-40000 Hz +-3 db
• Crossover: 6db/ottava
• Frequenza di taglio: 1900Hz
• Misure: cm. 102x24x47
• Peso Kg 38 cadauna

The search for the perfect symbiosis because not everyone can have an auditorium for music and sometimes the music to be shared at the time and place where it’s better off on the couch to relax alone or with friends ..

Being in harmony with the environment means you can listen at low volume and relax with the soft sounds of the first  watt  or excited  raising the volume  recreating the feeling of strength and dynamic sound live.

The particular double S inclined shape of  cabinet  to tune the timing of the sound and reverberations and preserve its harmonics without coloring but without losing any of the essence of music.

Feel the music ‘s  content of the sounds in perfect balance with each other …

Each incision returned with all of the content of what is music and sounds of that moment… of that instant.. .. for that moment you feel emotion.

The combination of sounds between the drivers used in the Orchestra project  is researched and exclusive, the only way to get the time of ” sound “and time of ” silence” consistent low-frequency harmonics up to the most slender of the higher tones .

The Heil tweeter  or better known as  Air Motion Transformer recognized as one of the best drivers for the high frequencies of all time. The increased speed with which creates sound and the speed with which returns  in the silence are unreachable from others drivers and give a sense of cleanliness and naturalness to the sound and its harmonics .

The emission  bipolar increases  three-dimensionality and the feeling of having in front us the music and its performers.

The midrange Accuton of new technology , ultra-light  and ultra-powerful magnets to control the damping factor (silence ) in a consistent manner at the time of the tweeter granted in a dedicated cabinet releases overtones and reverberations range of media through the grooves and slits in them in the back of the cabinet togheter with the sounds of the AMT .

The woofer built handcrafted Scan Speak Revelator series of last generation tuned  in particular the cabinet agreed to  harmonize low and very low frequencies up to the limits of hearing .

The crossover, hidden , artisan , simple sometimes trivial ….
Because he was born on the drivers chosen and these are chosen for the type of cross.

But give a first order 6Db per octave , a system that has always been preferred in our cross , a sound and a character in a speaker that uses drivers ” complicated ” required research ,time and passion .

The electric pulsed heart of the system  sits between the ” command” amplifier and the ” performers ” or ” drivers” of movement that creates the sound through their membranes .

Phase , impedance curves , frequency response , are analyzed and choice working  of sound and of  analysis and at the same time , thanks to the analysis system created at the beginning of Extreme Audio and always saw that  discoveries of what is sound from what is annoyance .

The passion and the search for the ” best ” of ‘ ” emotion ” saw give importance to the most different types of crossover components from the best paper oil  of the highest quality to Polypropylene  of last generation or very low loss inductors , each compatible and synergistic with a project ,  to a sound.

Everything transmitted to drivers from the cables , the ” arteries ” of the beating heart that give the right timing . So these are White Gold Cable and patent LTI .

Who most of us have seen the birth of cables and conductors in synergy with crossover design and driver .
No component is secondary when looking for an absolute result

Perfect fusion of aesthetic forms at the mere sound with diagonal grooves and curves to give the energy distribution emitted by the drivers.

Multilayered and MDF wood species with high density of tasks, each with different thicknesses of absorbing vibrations or resonators for hot zones sound that intersect each other in the project Orchestra.
Built by the best cabinet-makers entirely from Veneto in Italy and painted with super high gloss lacquer.

Orchestra can be built with wood Rosewood, Walnut, Ebony, Cherry and Oak.

Front and rear can be obtained with thick leather finely crafted as an alternative to the classic matt black and  lacquered black  hand-brushed mirror effect.

• Speaker Type: 3-way bass-reflex
• Tweeter Trasformer Heil Air Motion.
• Midrange Accuton series Ceramic
• Woofer Scan Speak Revelator 22 cm
• Sensitivity: 90 dB.
• Impedance: 8 ohms
• Max power: 150 watts.
• Power amplifier: from 40 watts to 150 watts.
• Frequency response: 28 to 24,000 Hz + – 3 db
• Crossover: 6dB/octave
• Cut of frequency: 180 – 2000Hz
• Dimensions: cm. 25,5x 57xh 113
• Net Weight 45 kg each

The search for the perfect symbiosis because not everyone can have an auditorium for music and sometimes the music to be shared at the time and place where it’s better off on the couch to relax alone or with friends ..

Being in harmony with the environment means you can listen at low volume and relax with the soft sounds of the first  watt  or excited  raising the volume  recreating the feeling of strength and dynamic sound live.

The particular double S inclined shape of  cabinet  to tune the timing of the sound and reverberations and preserve its harmonics without coloring but without losing any of the essence of music.

Feel the music ‘s  content of the sounds in perfect balance with each other …

Each incision returned with all of the content of what is music and sounds of that moment… of that instant.. .. for that moment you feel emotion.

The combination of sounds between the drivers used in the Orchestra project  is researched and exclusive, the only way to get the time of ” sound “and time of ” silence” consistent low-frequency harmonics up to the most slender of the higher tones .

The Heil tweeter  or better known as  Air Motion Transformer recognized as one of the best drivers for the high frequencies of all time. The increased speed with which creates sound and the speed with which returns  in the silence are unreachable from others drivers and give a sense of cleanliness and naturalness to the sound and its harmonics .

The emission  bipolar increases  three-dimensionality and the feeling of having in front us the music and its performers.

The midrange Accuton of new technology , ultra-light  and ultra-powerful magnets to control the damping factor (silence ) in a consistent manner at the time of the tweeter granted in a dedicated cabinet releases overtones and reverberations range of media through the grooves and slits in them in the back of the cabinet togheter with the sounds of the AMT .

The woofer built handcrafted Scan Speak Revelator series of last generation tuned  in particular the cabinet agreed to  harmonize low and very low frequencies up to the limits of hearing .

The crossover, hidden , artisan , simple sometimes trivial ….
Because he was born on the drivers chosen and these are chosen for the type of cross.

But give a first order 6Db per octave , a system that has always been preferred in our cross , a sound and a character in a speaker that uses drivers ” complicated ” required research ,time and passion .

The electric pulsed heart of the system  sits between the ” command” amplifier and the ” performers ” or ” drivers” of movement that creates the sound through their membranes .

Phase , impedance curves , frequency response , are analyzed and choice working  of sound and of  analysis and at the same time , thanks to the analysis system created at the beginning of Extreme Audio and always saw that  discoveries of what is sound from what is annoyance .

The passion and the search for the ” best ” of ‘ ” emotion ” saw give importance to the most different types of crossover components from the best paper oil  of the highest quality to Polypropylene  of last generation or very low loss inductors , each compatible and synergistic with a project ,  to a sound.

Everything transmitted to drivers from the cables , the ” arteries ” of the beating heart that give the right timing . So these are White Gold Cable and patent LTI .

Who most of us have seen the birth of cables and conductors in synergy with crossover design and driver .
No component is secondary when looking for an absolute result

Perfect fusion of aesthetic forms at the mere sound with diagonal grooves and curves to give the energy distribution emitted by the drivers.

Multilayered and MDF wood species with high density of tasks, each with different thicknesses of absorbing vibrations or resonators for hot zones sound that intersect each other in the project Orchestra.
Built by the best cabinet-makers entirely from Veneto in Italy and painted with super high gloss lacquer.

Orchestra can be built with wood Rosewood, Walnut, Ebony, Cherry and Oak.

Front and rear can be obtained with thick leather finely crafted as an alternative to the classic matt black and  lacquered black  hand-brushed mirror effect.

• Speaker Type: 3-way bass-reflex
• Tweeter Trasformer Heil Air Motion.
• Midrange Accuton inverse ceramic dome
• Woofer Scan Speak Revelator 18 cm
• Sensitivity: 88,5 dB.
• Impedance: 8 ohms
• Max power: 130 watts.
• Power amplifier: from 40 watts to 130 watts.
• Frequency response: 34 to 24,000 Hz + – 3 db
• Crossover: 6dB/octave
• Cut of frequency: 500 – 3000Hz
• Dimensions: cm. 26x 56x h 103
• 
 Net Weight 35 kg each

The search for the perfect symbiosis because not everyone can have an auditorium for music and sometimes the music to be shared at the time and place where it’s better off on the couch to relax alone or with friends ..

Being in harmony with the environment means you can listen at low volume and relax with the soft sounds of the first  watt  or excited  raising the volume  recreating the feeling of strength and dynamic sound live.

The particular double S inclined shape of  cabinet  to tune the timing of the sound and reverberations and preserve its harmonics without coloring but without losing any of the essence of music.

Feel the music ‘s  content of the sounds in perfect balance with each other …

Each incision returned with all of the content of what is music and sounds of that moment… of that instant.. .. for that moment you feel emotion.

The combination of sounds between the drivers used in the Orchestra project  is researched and exclusive, the only way to get the time of ” sound “and time of ” silence” consistent low-frequency harmonics up to the most slender of the higher tones .

The Heil tweeter  or better known as  Air Motion Transformer recognized as one of the best drivers for the high frequencies of all time. The increased speed with which creates sound and the speed with which returns  in the silence are unreachable from others drivers and give a sense of cleanliness and naturalness to the sound and its harmonics .

The emission  bipolar increases  three-dimensionality and the feeling of having in front us the music and its performers.

The midrange Accuton of new technology , ultra-light  and ultra-powerful magnets to control the damping factor (silence ) in a consistent manner at the time of the tweeter granted in a dedicated cabinet releases overtones and reverberations range of media through the grooves and slits in them in the back of the cabinet togheter with the sounds of the AMT .

The woofer built handcrafted Scan Speak Revelator series of last generation tuned  in particular the cabinet agreed to  harmonize low and very low frequencies up to the limits of hearing .

The crossover, hidden , artisan , simple sometimes trivial ….
Because he was born on the drivers chosen and these are chosen for the type of cross.

But give a first order 6Db per octave , a system that has always been preferred in our cross , a sound and a character in a speaker that uses drivers ” complicated ” required research ,time and passion .

The electric pulsed heart of the system  sits between the ” command” amplifier and the ” performers ” or ” drivers” of movement that creates the sound through their membranes .

Phase , impedance curves , frequency response , are analyzed and choice working  of sound and of  analysis and at the same time , thanks to the analysis system created at the beginning of Extreme Audio and always saw that  discoveries of what is sound from what is annoyance .

The passion and the search for the ” best ” of ‘ ” emotion ” saw give importance to the most different types of crossover components from the best paper oil  of the highest quality to Polypropylene  of last generation or very low loss inductors , each compatible and synergistic with a project ,  to a sound.

Everything transmitted to drivers from the cables , the ” arteries ” of the beating heart that give the right timing . So these are White Gold Cable and patent LTI .

Who most of us have seen the birth of cables and conductors in synergy with crossover design and driver .
No component is secondary when looking for an absolute result

Perfect fusion of aesthetic forms at the mere sound with diagonal grooves and curves to give the energy distribution emitted by the drivers.

Multilayered and MDF wood species with high density of tasks, each with different thicknesses of absorbing vibrations or resonators for hot zones sound that intersect each other in the project Orchestra.
Built by the best cabinet-makers entirely from Veneto in Italy and painted with super high gloss lacquer.

Orchestra can be built with wood Rosewood, Walnut, Ebony, Cherry and Oak.

Front and rear can be obtained with thick leather finely crafted as an alternative to the classic matt black and  lacquered black  hand-brushed mirror effect.

• Speaker Type: 3-way bass-reflex with Tweeter Transformer Heil Air Motion.
• Midrange 18 cm , nanocarbon fiber sandwich
• Woofer two for 30 cm , paper sandwich large
• 80 mm double voice coils
• Sensitivity: 93.5 dB.
• Impedance: 6 ohms
• Max power: 500 watts.
• Power amplifier: from 40 watts to 500 watts.
• Frequency response: 20 to 30,000 Hz + – 3 db
• Crossover: 6dB/octave
• Cut of frequency: 150 – 1900Hz
• Dimensions: cm. 40x70xh146
• Net Weight 110 kg each

Orchestra 2.5

The search for the perfect symbiosis because not everyone can have an auditorium for music and sometimes the music to be shared at the time and place where it’s better off on the couch to relax alone or with friends ..

Being in harmony with the environment means you can listen at low volume and relax with the soft sounds of the first  watt  or excited  raising the volume  recreating the feeling of strength and dynamic sound live.

The particular double S inclined shape of  cabinet  to tune the timing of the sound and reverberations and preserve its harmonics without coloring but without losing any of the essence of music.

Feel the music ‘s  content of the sounds in perfect balance with each other …

Each incision returned with all of the content of what is music and sounds of that moment… of that instant.. .. for that moment you feel emotion.

Il connubio di suoni tra i drivers utilizzati nelle Orchestra è ricercato e unico il tutto per ottenere tempi di “suono”
e tempi di “silenzio” coerenti delle basse frequenze fino ai più esili armonici dei toni più alti.

Il tw di Heil o meglio conosciuto come Air Motion Transformer riconosciuto come uno dei migliori drivers per le alte frequenze di ogni tempo. La maggiore velocità con cui crea suono e la velocità con cui torna al silenzio sono inarrivabili e danno un senso di pulizia e di naturalezza ai suoni e alle sue armoniche.

L’emissione bipolare aumenta la tridimensionalità e la sensazione di aver davanti a noi la musica e i suoi esecutori.

Il midrange Carbon fiber di nuova tecnologia ultraleggero con magneti ultrapotenti per controllare il fattore di smorzamento (silenzio) in modo coerente ai tempi del tweeter accordato in un cabinet dedicato rilascia armonici e riverberi di gamma media tramite le fresature e feritoie a esse nella parte posteriore del cabinet assieme ai suoni dell’AMT.

Il woofer di costruzione handcrafted di ultima generazione accordato nel particolare cabinet per accordare ed armonizzare basse e bassissime frequenze fino ai limiti dell’udibile.

il crossover, nascosto artigianale semplice a volte banale….
Perché nato sui drivers scelti e detti sono scelti per il tipo di cross .

Il cross come componente attivo del suono e non come partitore o protezione degli altoparlanti.
parlare di tecnologie di ricerca e di design per un crossover di primo ordine può sembrare troppo.

Ma dare con un primo ordine a 6Db per ottava, sistema che da sempre è stato preferito nei nostri cross, un suono e un carattere a un diffusore che utilizza drivers “complicati” ha richiesto ricerca tempo e passione.

Il cuore elettrico pulsante del sistema si interpone tra il “comando” amplificatore e gli “esecutori” o “drivers” di movimento che creano attraverso le loro membrane il suono.

Fase, curve di impedenza, risposta in frequenza, sono analizzate e scelte lavorando di suono e di analisi contemporaneamente grazie al sistema di analisi creato agli inizi di Extreme Audio e che sempre ha visto generare scoperte di ciò che è suono da ciò che è fastidio.

La passione e la ricerca del “meglio” dell’”emozione” ha visto dare importanza alle tipologie più diverse di componenti di crossover dai migliori Carta Olio ai Polipropilene di altissima qualità di ultima generazione o alle induttanze a bassissima perdita ognuno compatibile e sinergico a un progetto a un suono.

Il tutto trasmesso ai drivers tramite i cavi le “arterie” del cuore pulsante che danno il giusto timing. Ovvero White Gold e il brevetto LTI.

Chi più di noi ha visto nascere cavi e conduttori in sinergia di progetto con crossover e driver.
Nessun componente è secondario quando si cerca un risultato assoluto.

Perfetta fusione di forme estetiche al solo suono con fresature diagonali e curvature a dare distribuzione all’energia emessa dai drivers.

Multistrati di essenze lignee e MDF ad alta densità di differenti spessori ognuno con compiti di assorbimento vibrazioni o di risonatori per zone calde di suono si intersecano tra loro nel progetto Orchestra.
Costruito dai migliori ebanisti veneti interamente in Italia ed ivi verniciato con super laccature high gloss.

Possono essere costruite con essenze Palissandro, Noce, Ebano, Ciliegio e Rovere.

Frontali e posteriori possono essere richieste con Pelle di alto spessore finemente lavorate in alternativa al classico nero Opaco e al nero laccato lucido spazzolato a mano effetto specchio.

Performance data:

• 3 vie : 12″ woofer bass reflex system
• 6″ midrange zetacarbon with harmonic port;
• Amt Heil driver neodymium magnet;
• freq. range    20 – 30000 Hz
• crossover 1st order
• 8 ohm
• power suggested from 20 to 300 Watts;

Physical Data :

• Weight   105 Kg
• Dimension width 36 cm
• height 138 cm
• depth 76 cm

The search for the perfect symbiosis because not everyone can have an auditorium for music and sometimes the music to be shared at the time and place where it’s better off on the couch to relax alone or with friends ..

Being in harmony with the environment means you can listen at low volume and relax with the soft sounds of the first  watt  or excited  raising the volume  recreating the feeling of strength and dynamic sound live.

The particular double S inclined shape of  cabinet  to tune the timing of the sound and reverberations and preserve its harmonics without coloring but without losing any of the essence of music.

Feel the music ‘s  content of the sounds in perfect balance with each other …

Each incision returned with all of the content of what is music and sounds of that moment… of that instant.. .. for that moment you feel emotion.

Il connubio di suoni tra i drivers utilizzati nelle Orchestra è ricercato e unico il tutto per ottenere tempi di “suono”
e tempi di “silenzio” coerenti delle basse frequenze fino ai più esili armonici dei toni più alti.

Il tw di Heil o meglio conosciuto come Air Motion Transformer riconosciuto come uno dei migliori drivers per le alte frequenze di ogni tempo. La maggiore velocità con cui crea suono e la velocità con cui torna al silenzio sono inarrivabili e danno un senso di pulizia e di naturalezza ai suoni e alle sue armoniche.

L’emissione bipolare aumenta la tridimensionalità e la sensazione di aver davanti a noi la musica e i suoi esecutori.

Il midrange Carbon fiber di nuova tecnologia ultraleggero con magneti ultrapotenti per controllare il fattore di smorzamento (silenzio) in modo coerente ai tempi del tweeter accordato in un cabinet dedicato rilascia armonici e riverberi di gamma media tramite le fresature e feritoie a esse nella parte posteriore del cabinet assieme ai suoni dell’AMT.

Il woofer di costruzione handcrafted di ultima generazione accordato nel particolare cabinet per accordare ed armonizzare basse e bassissime frequenze fino ai limiti dell’udibile.

il crossover, nascosto artigianale semplice a volte banale….
Perché nato sui drivers scelti e detti sono scelti per il tipo di cross .

Il cross come componente attivo del suono e non come partitore o protezione degli altoparlanti.
parlare di tecnologie di ricerca e di design per un crossover di primo ordine può sembrare troppo.

Ma dare con un primo ordine a 6Db per ottava, sistema che da sempre è stato preferito nei nostri cross, un suono e un carattere a un diffusore che utilizza drivers “complicati” ha richiesto ricerca tempo e passione.

Il cuore elettrico pulsante del sistema si interpone tra il “comando” amplificatore e gli “esecutori” o “drivers” di movimento che creano attraverso le loro membrane il suono.

Fase, curve di impedenza, risposta in frequenza, sono analizzate e scelte lavorando di suono e di analisi contemporaneamente grazie al sistema di analisi creato agli inizi di Extreme Audio e che sempre ha visto generare scoperte di ciò che è suono da ciò che è fastidio.

La passione e la ricerca del “meglio” dell’”emozione” ha visto dare importanza alle tipologie più diverse di componenti di crossover dai migliori Carta Olio ai Polipropilene di altissima qualità di ultima generazione o alle induttanze a bassissima perdita ognuno compatibile e sinergico a un progetto a un suono.

Il tutto trasmesso ai drivers tramite i cavi le “arterie” del cuore pulsante che danno il giusto timing. Ovvero White Gold e il brevetto LTI.

Chi più di noi ha visto nascere cavi e conduttori in sinergia di progetto con crossover e driver.
Nessun componente è secondario quando si cerca un risultato assoluto.

Perfetta fusione di forme estetiche al solo suono con fresature diagonali e curvature a dare distribuzione all’energia emessa dai drivers.

Multistrati di essenze lignee e MDF ad alta densità di differenti spessori ognuno con compiti di assorbimento vibrazioni o di risonatori per zone calde di suono si intersecano tra loro nel progetto Orchestra.
Costruito dai migliori ebanisti veneti interamente in Italia ed ivi verniciato con super laccature high gloss.

Possono essere costruite con essenze Palissandro, Noce, Ebano, Ciliegio e Rovere.

Frontali e posteriori possono essere richieste con Pelle di alto spessore finemente lavorate in alternativa al classico nero Opaco e al nero laccato lucido spazzolato a mano effetto specchio.

The search for the perfect symbiosis because not everyone can have an auditorium for music and sometimes the music to be shared at the time and place where it’s better off on the couch to relax alone or with friends ..

Being in harmony with the environment means you can listen at low volume and relax with the soft sounds of the first  watt  or excited  raising the volume  recreating the feeling of strength and dynamic sound live.

The particular double S inclined shape of  cabinet  to tune the timing of the sound and reverberations and preserve its harmonics without coloring but without losing any of the essence of music.

Feel the music ‘s  content of the sounds in perfect balance with each other …

Each incision returned with all of the content of what is music and sounds of that moment… of that instant.. .. for that moment you feel emotion.

Il connubio di suoni tra i drivers utilizzati nelle Orchestra è ricercato e unico il tutto per ottenere tempi di “suono”
e tempi di “silenzio” coerenti delle basse frequenze fino ai più esili armonici dei toni più alti.

Il tw di Heil o meglio conosciuto come Air Motion Transformer riconosciuto come uno dei migliori drivers per le alte frequenze di ogni tempo. La maggiore velocità con cui crea suono e la velocità con cui torna al silenzio sono inarrivabili e danno un senso di pulizia e di naturalezza ai suoni e alle sue armoniche.

L’emissione bipolare aumenta la tridimensionalità e la sensazione di aver davanti a noi la musica e i suoi esecutori.

Il midrange Carbon fiber di nuova tecnologia ultraleggero con magneti ultrapotenti per controllare il fattore di smorzamento (silenzio) in modo coerente ai tempi del tweeter accordato in un cabinet dedicato rilascia armonici e riverberi di gamma media tramite le fresature e feritoie a esse nella parte posteriore del cabinet assieme ai suoni dell’AMT.

Il woofer di costruzione handcrafted di ultima generazione accordato nel particolare cabinet per accordare ed armonizzare basse e bassissime frequenze fino ai limiti dell’udibile.

il crossover, nascosto artigianale semplice a volte banale….
Perché nato sui drivers scelti e detti sono scelti per il tipo di cross .

Il cross come componente attivo del suono e non come partitore o protezione degli altoparlanti.
parlare di tecnologie di ricerca e di design per un crossover di primo ordine può sembrare troppo.

Ma dare con un primo ordine a 6Db per ottava, sistema che da sempre è stato preferito nei nostri cross, un suono e un carattere a un diffusore che utilizza drivers “complicati” ha richiesto ricerca tempo e passione.

Il cuore elettrico pulsante del sistema si interpone tra il “comando” amplificatore e gli “esecutori” o “drivers” di movimento che creano attraverso le loro membrane il suono.

Fase, curve di impedenza, risposta in frequenza, sono analizzate e scelte lavorando di suono e di analisi contemporaneamente grazie al sistema di analisi creato agli inizi di Extreme Audio e che sempre ha visto generare scoperte di ciò che è suono da ciò che è fastidio.

La passione e la ricerca del “meglio” dell’”emozione” ha visto dare importanza alle tipologie più diverse di componenti di crossover dai migliori Carta Olio ai Polipropilene di altissima qualità di ultima generazione o alle induttanze a bassissima perdita ognuno compatibile e sinergico a un progetto a un suono.

Il tutto trasmesso ai drivers tramite i cavi le “arterie” del cuore pulsante che danno il giusto timing. Ovvero White Gold e il brevetto LTI.

Chi più di noi ha visto nascere cavi e conduttori in sinergia di progetto con crossover e driver.
Nessun componente è secondario quando si cerca un risultato assoluto.

Perfetta fusione di forme estetiche al solo suono con fresature diagonali e curvature a dare distribuzione all’energia emessa dai drivers.

Multistrati di essenze lignee e MDF ad alta densità di differenti spessori ognuno con compiti di assorbimento vibrazioni o di risonatori per zone calde di suono si intersecano tra loro nel progetto Orchestra.
Costruito dai migliori ebanisti veneti interamente in Italia ed ivi verniciato con super laccature high gloss.

Possono essere costruite con essenze Palissandro, Noce, Ebano, Ciliegio e Rovere.

Frontali e posteriori possono essere richieste con Pelle di alto spessore finemente lavorate in alternativa al classico nero Opaco e al nero laccato lucido spazzolato a mano effetto specchio.